Accessory

MMP-F MODULAR ACTIVE BOOM (MMP-F)

Customize your microphone

Boom pole length
MSRP $569.95 excl. local VAT
Product ID MMP-F15
For podium or stylish floor stand applications, the d:dicate™ MMP-F preamplifier series is available in different lengths and gooseneck choices.

Equipped with state-of-the-art preamplifier design and sleek appearance, you can combine this preamplifier with any modular capsule in the d:dicate™ Microphones Series. Excellent radio frequency rejection is obtained through the DPA-designed impedance balancing with active drive.

Custom lengths (up to 120 cm) and gooseneck choices (top/bottom/both) can be ordered at a custom fee charge.
 

Boom lenghts

The 4011F is available in five lengths:
  • 15 cm, 30 cm and 45 cm boom intended for podium solutions 
 
  • 75 cm and 120 cm for floor stand applications.



To learn more read our Microphone University article: Impedance balancing with Active Drive vs transformer coupled outputs.


Order numbers: MMP-F15, MMP-F30, MMP-F45, MMP-F75, MMP-F120.
 

Specifications

accessories MMP-F MODULAR ACTIVE BOOM (MMP-F)

Output connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Low-cut frequency, -3 dB
15 Hz
Noise with shorted input A-weighted
0.6 µV
Output voltage, RMS
2.2V
Output voltage, peak
3.1V
Type of electronic circuit
Active
THD@1VRMS, 1kHz
< 0.2 %
Dynamic range
131 dB
Output impedance
100 Ω
Minimum load impedance
2 kΩ
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing
Common mode rejection ratio (CMRR)
> 40 dB
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
3.5 mA
Color
Matte Black
Diameter
19 mm (0.75 in)
Length
15, 30, 45, 75, 120 cm
Temperature range
-40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity (RH)
Up to 90%


Loading