DPA MICROPHONES
Search
12
zoom out zoom in

SMK4060 Stereo Mic Kit w. 4060

The SMK4060 Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage.

The SMK4060 combines two d:screet 4060s omnidirectional miniature microphones, Hi-Sens, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with a 4060 (or any of d:screet miniature mics) to place the mic on a reflective boundary such as a floor, wall, ceiling, piano lid etc, enabling them to capture the ambient sound of the area. The sound captured from this “pressure zone” has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air" and serves as a kind of acoustical zoom.

Also included in the kit is among others the DMM0007 soft rubber holder. This allows all kinds of instruments, from acoustic guitar through grand piano to drums, to be mounted in the best-sounding position, using special non-marking adhesive discs

Also available as SMK4061 with a DPA4061 Miniature Omnidirectional Microphone, Lo-Sens.

What is in the box
The DPA SMK4060 Stereo Microphone Kit contains:

2 x 4060 Omnidirectional Mic, Hi-Sens, Black, 3 meter cable, and soft boost grids
2 x BLM6000-B Boundary Layer Mount, Black
2 x DAD6001-BC MicroDot to 3-pin XLR (P48) w. Belt Clip
1 x DMM0007 Universal Surface Mount, 5 pcs.
2 x DMM0011-B Magnet Mount, Black
1 x DUA0560 Windscreen, Black, 5 pcs.
2 x MHS6005 Microphone Holder for Strings

Specifications for SMK4060 Stereo Mic Kit w. 4060

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB: 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dB(A
Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
Dynamic range: Typ. 100 dB
Max. SPL, peak before clipping: 134 dB
Output impedance: 30 - 40 Ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V – max. 50 V through DPA adapter; with DAD6001: 48 V phantom power ±4 V.
Connector: MicroDot
Weight: 7.5 g (0.26 oz) incl. cable and MicroDot connector
Microphone length: 12.7 mm (0.5 in)
Cable length: 3 m (9.4 ft)
Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB

Diagrams for SMK4060 Stereo Mic Kit w. 4060

Directional Characteristics of DPA 4060 (normalized)Directional Characteristics of DPA 4060 (normalized)
On-axis frequency response of Miniature Microphones. Dotted line is with high boost grid and solid line with soft boost grid.On-axis frequency response of Miniature Microphones. Dotted line is with high boost grid and solid line with soft boost grid.

The following products are related to SMK4060 Stereo Mic Kit w. 4060

Related products

SMK4061 Stereo Mic Kit w. 4061

The SMK4061 Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage.

IMK4060 Instrument Mic Kit w. 4060

Containing a DPA Miniature microphone 4060 and an XLR adapter with a selection of unique mounting accessories, this kit is designed for close miking a wide variety of musical instruments.

IMK4061 Instrument Mic Kit w. 4061

Containing a DPA Miniature microphone 4061 and an XLR adapter with a selection of unique mounting accessories, this kit is designed for close miking a wide variety of musical instruments.

d:screet™ 4060 Omnidirectional Microphone, Hi-Sens

Tiny mic with neutral sound character and great detail; large dynamic range, low noise and high sensitivity, fits numerous transmitters.

Accessories included

Windscreens for cylindrical head, Black, 5 pcs.

The windscreen is made of foam. The size and contruction of the foam ensures that the windscreen does not attenuate the higher frequencies more than the tolerance field of the microphone frequency response and simultaneously it provides excellent protection from wind and pop-noises.

DMM0011-B Magnet Mount, Black

DMM0011-W can hold up to two Miniature Microphones.

DAD6001-BC: MicroDot to 3-pin XLR (P48) w. Belt Clip

Adapter for powering Miniature Microphones via standard P48.

The DAD6001 is passive and designed for use with Miniature Microphones from DPA only.

DMM0007 Universal Surface Mount, 5 pcs.

DMM0007 Universal Surface Mount is a soft rubber holder for Miniature Microphones on numerous instruments.

BLM6000-B Boundary Layer Mount, Black

The BLM6000-B is a unique accessory tool that enhances the versatility of your DPA miniature microphone.

d:screet™ 4060 Omnidirectional Microphone, Hi-Sens

Tiny mic with neutral sound character and great detail; large dynamic range, low noise and high sensitivity, fits numerous transmitters.

Price list

Download price list (PDF opens in new tab)

Wireless MicroDot adapters


DPA miniature mics are available with adapters for wireless systems

Dictionary

Look up technical terms in the DPA pro audio dictionary