DPA MICROPHONES
12
zoom out zoom in

4017B-R Shotgun Microphone w. Rycote® Windshield

Five year warranty

DPA Microphones has joined forces with Rycote® to develop the DPA 4017 Shotgun/Rycote® Windshield Solution. The strong suspension and windshield solution has been designed specifically to take the DPA 4017B shotgun mic’s compact size and light weight into consideration.

This kit provides everything an outside broadcaster, journalist or location film maker could need for clear, directional sound, regardless of the weather and environmental conditions.

Included in the box
DPA 4017B Shotgun premounted in Rycote® Suspension with the Rycote® Windshield
DPA XLR cable
DPA Windscreen for 4017B
Rycote® fur windjammer
Rycote® XLR holder
Rycote® brush

Specifications for 4017B-R Shotgun Microphone w. Rycote® Windshield

Directional characteristics: Supercardioid, lobe-shaped
Principle of operation: Pressure gradient, with interference tube
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz to 20 kHz
Frequency range, ± 2 dB: 70 Hz to 20 kHz, permanent third order high pass filter at 50 Hz
Sensitivity, nominal ± 2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (max. 26 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 80 dB(A)
Total Harmonic Distortion (THD): < 1 % up to 133 dB SPL peak
Minimum load impedance: 2 kohm
Dynamic range: Typ. 119 dB
Max. SPL, peak before clipping: 138 dB
Filters: High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
Output impedance: < 150 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Signal balanced
Common Mode Rejection Ratio (CMRR): > 40 dB
Power supply: 48 V Phantom power (± 4 V)
Current consumption: 4.5 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
Color: Matte black
Weight: 68 g (2.4 oz)
Microphone diameter: 19 mm (0.75 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 212 mm (8.3 in)
Output voltage, RMS: > 1.8 V
Polarity: +V at Pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (14 °F to 113 °F)
Relative Humidity (RH): Up to 90 %

Diagrams for 4017B-R Shotgun Microphone w. Rycote® Windshield

Frequency responses of switching filters on 4017BFrequency responses of switching filters on 4017B
On- and off-axis responses of 4017B measured at 60 cm (23.6 in)On- and off-axis responses of 4017B measured at 60 cm (23.6 in)
Directional characteristics of DPA 4017B (normalized)Directional characteristics of DPA 4017B (normalized)

The following products are related to 4017B-R Shotgun Microphone w. Rycote® Windshield

Related products

4017B Shotgun Microphone

RWK4017 Rycote® Windshield Kit for 4017B

The strong Rycote suspension and windshield solution has been designed specifically to take the DPA 4017 shotgun mic’s compact size and light weight into consideration.

Downloads

Generate product brief (PDF)

Price list

Download price list (PDF opens in new window)

Wireless MicroDot adapters


DPA miniature mics are available with adapters for wireless systems

Dictionary

Look up technical terms in the DPA pro audio dictionary

DPA on TwitterDPA on FacebookNewsletter