DPA MICROPHONES
12
zoom out zoom in

3511 Stereo Kit w. 4011-TL

  • often used for piano recordings of jazz or pop
  • handles very high sound pressure levels
  • stereo boom and accessories included

The 3511 is a complete stereo kit for a broad range of recording applications using two 4011-TL Cardioid Microphones, carefully matched within ±1 dB on frequency response, sensitivity, and self-noise.

These cardioids are exceptionally linear in their frequency response - also off axis, giving you the natural experience.

Several standard set-ups such as ORTF and XY are possible.

The 4011-TL mics handle very high SPL and will therefore allow close placement as well as more distant.

Often used for piano recordings of jazz or pop with a placement closer to the hammers or as overheads for drums.

The kit includes microphones, a carrying case, two windscreens, two very effective shock mounts, a precision-crafted stereo boom for secure mounting of microphone pairs for A-B stereo recordings, and a spacer to allow XY or ORTF stereo set-ups on the boom. Please refer to Related products for full description of accessories.

Specifications for 3511 Stereo Kit w. 4011-TL

Directional characteristics: Cardioid
Principle of operation: Pressure gradient
Cartridge type: 19 mm (0.75 in) pre-polarized condenser
Frequency range, +/- 2 dB: 40 Hz – 20 kHz
Sensitivity, nominal +/- 2 dB at 250 Hz: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 75 dB(A)
Total Harmonic Distortion (THD): <0.5 % up to 110 dB SPL peak
Total Harmonic Distortion (THD): <1 % up to 116 dB SPL peak
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 158 dB
Switchable attenuator: 0 dB, -20 dB
Output impedance: < 200 Ohm
Cable drive capability: Up to 100 m (328 ft)
Power supply: 48 V Phantom power
Current consumption: 2.60 mA
Connector: 3-pin XLR-M (Standard P48)
Weight: 165 g (5.82 oz)
Microphone length: 175 mm (6.89 in)
Matching tolerance (frequency response and sensitivity): ±1 dB (40 Hz – 20 kHz)
Phase deviation for kit: < 10°

Diagrams for 3511 Stereo Kit w. 4011-TL

Phase response of DPA 4011-TLPhase response of DPA 4011-TL
Typical third-octave inherent-noise spectrum of DPA 4011-TLTypical third-octave inherent-noise spectrum of DPA 4011-TL
The proximity effect exhibited by DPA 4011-TL.The proximity effect exhibited by DPA 4011-TL.
On-and off-axis responses of DPA 4011-TL measured at 30 cm.On-and off-axis responses of DPA 4011-TL measured at 30 cm.
Directional characteristics of DPA 4011-TL (normalized).Directional characteristics of DPA 4011-TL (normalized).
4011-UA0897-re-UA06394011-UA0897-re-UA0639

The following products are related to 3511 Stereo Kit w. 4011-TL

Related products

4011-TL Cardioid Microphone P48

The 4011-TL cardioid microphone is an upgraded version of the classic DPA 4011 renowned in recording studios all over the world as an exceptional mic

Accessories included

UA0897 Shock Mount

The UA0897 Shock Mount is designed for use in environments where vibration levels are unusually high.

UA0896 Windscreen for 4011/12/15/16

The UA0896 is designed for microphones with Ø19 mm (0.75 in) housings. It is well suited for outdoor applications and for speech and singing at close distances.

UA0836 Stereo Boom with Holders

The UA0837 is a precision-crafted microphone boom for secure mounting of microphone pairs for A-B stereo recordings.

DUA0019 Spacer for Stereo Boom, 0.75 in

The DUA0019 is a 19 mm spacer which allows Standard Cardioid Microphones Types 4011-TL and 4012 to be used in XY stereo or ORTF stereo setups on the UA0836 and UA0837 Stereo Booms.

Download manual

Wireless adapters

DPA mini mics are available with adapters for wireless systems

Dictionary

Look up technical terms in the DPA pro audio dictionary

 Subscribe to our free newsletter