DPA MICROPHONES
12
zoom out zoom in

4011-TL Cardioid Microphone P48

  • very low distortion
  • handles incredibly high sound pressure levels 
  • totally faithful reproduction of the original sound 

       

The 4011-TL cardioid microphone is an upgraded version of the classic DPA 4011 renowned in recording studios all over the world as an exceptional mic.

State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion. The first order cardioid pick-up pattern gives superb separation between sound sources while spot-miking on every kind of live music.

The mic is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals. It can handle incredibly high sound levels and even includes a 20 dB pad switch to attenuate the output of the microphone.

A flat on axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pick-up.

The feeling of being there will always be more intense with the 4011-TL than with any other cardioid.

Specifications for 4011-TL Cardioid Microphone P48

Directional characteristics: Cardioid
Principle of operation: Pressure gradient
Cartridge type: 19 mm (0.75 in) pre-polarised condenser
Frequency range, ± 2 dB: 40 Hz – 20 kHz
Sensitivity, nominal, ±2 dB: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 75 dB(A)
Total harmonic distortion (THD): < 0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL peak
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 158 dB
Attenuators, filters etc.: 0 dB, -20 dB
Output impedance: < 200 ohm
Cable drive capability: Up to 100 m (328 ft)
Power supply: 48 V Phantom power
Current consumption: 2.60 mA
Connector: 3-pin XLR-M (Standard P48)
Weight: 165 g (5.82 oz)
Capsule diameter: 19 mm (0.75)
Length: 175 mm (6.89 in)

Diagrams for 4011-TL Cardioid Microphone P48

Directional characteristics of DPA 4011-TL (normalized).Directional characteristics of DPA 4011-TL (normalized).
On-and off-axis responses of DPA 4011-TL measured at 30 cm.On-and off-axis responses of DPA 4011-TL measured at 30 cm.
Phase response of DPA 4011-TLPhase response of DPA 4011-TL
Typical third-octave inherent-noise spectrum of DPA 4011-TLTypical third-octave inherent-noise spectrum of DPA 4011-TL
The proximity effect exhibited by DPA 4011-TL.The proximity effect exhibited by DPA 4011-TL.

The following products are related to 4011-TL Cardioid Microphone P48

Related products

4015-TL Wide Cardioid Microphone, P48

The wide cardioid covers a greater sound angle and is an excellent choice for grand piano, guitar, marimba and percussion or as a spot mic for groups in a symphony orchestra.

3511 Stereo Kit w. 4011-TL

The 3511 is a complete stereo kit for a broad range of recording applications using two 4011-TL Cardioid Microphones

4012 Cardioid Microphone, 130 V

Type 4012 is acoustically identical with the popular Type 4011-TL, but differs in the powering method which enables the 4012 to handle these extreme sound pressure levels

Accessories included

UA0896 Windscreen for 4011/12/15/16

The UA0896 is designed for microphones with Ø19 mm (0.75 in) housings. It is well suited for outdoor applications and for speech and singing at close distances.

UA0961 Microphone Holder

The UA0961 Microphone Holder is of a unique design, which ensures, that the microphone is held securely at all times.

Accessories available

TB4000 Table Base

The Table Base TB4000 is a beautifully designed base for use with most microphone holders with a 3/8-inch thread.

DUA0090 Pop Filter

The DPA pop filter is one of the most efficient pop reducing products on the market today.

UA0897 Shock Mount

The UA0897 Shock Mount is designed for use in environments where vibration levels are unusually high.

UA0836 Stereo Boom with Holders

The UA0837 is a precision-crafted microphone boom for secure mounting of microphone pairs for A-B stereo recordings.

UA0837 Stereo Boom excluding Holders

The UA0837 is a precision-crafted microphone boom for secure mounting of microphone pairs for A-B stereo recordings.

Download manual

Wireless adapters

DPA mini mics are available with adapters for wireless systems

Dictionary

Look up technical terms in the DPA pro audio dictionary

 Subscribe to our free newsletter