DPA Microphones :: Products

Description
Specifications
Diagrams
Related products

5006-11 Surround Microphone Kit

The 5006-11, 4006-TL/4011-TL Surround Microphone Kit consists of:
3 x 4006-TL Omnidirectional Microphones, P48, Transformerless (match within ±0.5 dB in sensitivity and frequency response in the microphone’s entire frequency range)
3 x L50B Acoustic Pressure Equalizers, 50 mm (1.97 in) Ball
3 x UA0961 Microphone Holder
3 x DD0251 Free-field Grid, Silver
2 x 4011-TL Cardioid Microphones, P48 (match within ±1 dB in sensitivity and frequency response in the microphone’s entire frequency range)
2 x UA0898 Shock Mounts
2 x DD0297 Diffuse-field Grid, Black
2 x UA0896 Windscreen
1 x PSM5000 Protractor for Shock Mount

Intended for use in Decca Tree front/backwards faced cardioids rear configuration, this kit offers:
The Decca Tree advantages: more vivid dynamics and clarity due to its closer placement
The excellent sound color and authentic reproduction that is unique for omni microphones
Full frequency range in front channels
Relatively little direct signal in rear channels; avoiding the front sound sources from sounding too close or even behind you

Specifications for 5006-11 Surround Microphone Kit

Directional characteristics:	4006-TL: Omnidirectional, 4011-TL: Cardioid
Principle of operation:	4006-TL: Pressure, 4011-TL: Pressure gradient
Cartridge type:	4006-TL:16 mm (0.63 in) pre-polarized condenser, 4011-TL: 19 mm (0.75 in) pre-polarized condenser
Frequency range:	4006-TL: 15 Hz – 20 kHz, 4011-TL: 40 Hz – 20 kHz
Sensitivity, nominal, ±2 dB:	4006-TL: 35 mV/Pa; -29 dB re. 1 V/Pa, 4011-TL: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level A-weighted:	4006-TL: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)), 4011-TL: Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))
Equiv. noise level ITU-R BS.468-4:	4006-TL: Typ. 27 dB (max. 29 dB), 4011-TL: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):	4006-TL: 79 dB, 4011-TL: 75 dB(A)
Total harmonic distortion (THD):	4006-TL: <0.5% THD up to 129 dB SPL peak, <1% THD up to 135 dB SPL peak. 4011-TL: <0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL peak
Dynamic range:	4006-TL: Typ. 120 dB, 4011-TL: Typ. 97 dB
Max. SPL, peak before clipping:	4006-TL: 143 dB, 4011-TL: 158 dB
Attenuators, filters etc.:	4011-TL: 0 dB, -20 dB
Output impedance:	4006-TL: <200 Ohm, 4011-TL: <200 Ohm
Cable drive capability:	4006-TL: Up to 100 m (328 ft), 4011-TL: Up to 100 m (328 ft)
Power supply:	4006-TL: Phantom P48, 4011-TL: 48 V Phantom power
Connector:	4006-TL: 3-pin XLR-M (Standard P48), 4011-TL: 3-pin XLR-M (Standard P48)
Weight:	4006-TL: 150 g (5.29 oz), 4011-TL: 165 g (5.82 oz)
Capsule diameter:	4006-TL: 16 mm (0.63 in), 4011-TL: 19 mm (0.75)
Length:	4006-TL: 165 mm (6.5 in), 4011-TL: 175 mm (6.89 in)
Temperature range:	4006-TL: -10 to +70° C (+14 to 158° F), 4011-TL: -10 to +70° C (+14 to 158° F)

Diagrams for 5006-11 Surround Microphone Kit

The following products are related to 5006-11 Surround Microphone Kit

Related products

S5 Surround Mount

The S5 Surround Mount is a highly versatile and stylish microphone mount. The Surround Mount provides extreme flexibility due to its unique building block design. It allows for numerous configurations while providing visual elegance.

D3 Decca Tree

The D3 Decca Tree is a highly versatile and stylish microphone mount. The Decca Tree provides extreme flexibility due to its unique building block design. It allows for numerous configurations while providing visual elegance.

5015 Surround Microphone Kit

Intended for use in WCSA (Wide Cardioid Surround Array)

5006 Surround Microphone Kit

Intended for use in spaced omni configurations

Accessories included

UA0898 Shock Mount for Integrated Cable in D3/S5

Shock Mount for Integrated Cable in D3/S5.

DD0297 Diffuse-field Grid, Black

4006-TL Omni Microphone, P48, Transformerless

Detailed and natural reproduction with high sensitivity and low noise-floor: 4006 is one of the most sought after studio mics – and the one that gives you the most value for your money.

UA0961 Microphone Holder

The UA0961 Microphone Holder is of a unique design, which ensures, that the microphone is held securely at all times.

PSM5000 Protractor for Shock Mount

Unit is mounted on TBH5000 in order to measure angles between neighboring microphones in D3- and S5 solutions. For shock mount.

DD0251 Free-field Grid, Silver

The DD0297 is a microphone protection grid ideally suited for making all types of far-field recordings.

UA0896 Windscreen for 4011/12/15/16

The UA0896 is designed for microphones with Ø19 mm (0.75 in) housings. It is well suited for outdoor applications and for speech and singing at close distances.

4011-TL Cardioid Microphone P48

The 4011-TL cardioid microphone is an upgraded version of the classic DPA 4011 renowned in recording studios all over the world as an exceptional mic

L50B Acoustic Pressure Equalizer, 1.97 in Ball

The L50B is a Ø50mm sphere shaped Acoustic Pressure Equaliser, designed for use with the Standard Microphone Type 4003 and 4006 or the A-B Stereo Kits Type 3529-A and 3530-A.