d:dicate™

3532-SP STEREO KIT WITH 4041-SP LARGE DIAPHRAGM OMNIDIRECTIONAL MICROPHONES, P48

Product Details

MSRP 7.120,00 € excl. local VAT
Product ID 3532-SP
The d:dicate™ 3532-SP is a complete state-of-the-art A-B Stereo Kit with two d:dicate™ 4041-SP Microphones. They are carefully matched within ±0.5 dB on both frequency response and sensitivity in the entire frequency bandwidth.

This A-B stereo kit is the ultimate choice for the demanding engineer and audio purist who emphasizes clarity, openness, precision, low self-noise and high sensitivity.

The kit is designed for a broad range of uses; for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more.

You get a bright and transparent sound quality with lots of headroom. With its soft boost, which is present on-axis, and gradually goes towards linearity off-axis, these omnidirectional microphones can be angled to use as a natural equalizer. These mics are a part of the d:dicate™ Recording Microphones Series.
 

The microphone capsule

The diaphragm and housing are both made from stainless steel. This gives the capsule a unique immunity against ambient temperature variations. The precision-made back plate is placed in a quartz insulator for maximum electrical stability. This gives the MMC4041 Large Diagram Capsule a unique sensitivity of up to 90 mV/Pa.

The 4041-SP has a frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz. Furthermore, the MMC4041 Large Diaphragm Capsule has extremely low self-noise of 7 dB(A) with the MMP4000-S. It also has enhanced SPL handling capability of up to 144 dB SPL before clipping occurs.

The MMC4041 Large Diaphragm Microphone Capsule can be unscrewed from the MMP4000-SP preamplifier, which allows you to exchange the preamplifier.

Features

The product offers the following features
Handles high sound pressure levels with no distortion
Natural and transparent sound

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

d:dicate™ 4053 Omnidirectional microphone on guitar and d:dicate™ Large Diaphragm microphone on vocals

Open video

WHAT'S IN THE BOX

accessories
2x
MMC4041 LARGE DIAPHRAGM CAPSULE FOR MMP4000 (MMC4041)
 
accessories
2x
MMP4000-SP SOLID STATE PREAMPLIFIER FOR MMC4041, P48 (MMP4000-SP)
 
accessories
2x
FOAM WINDSCREEN FOR d:dicate™ 4041 (DUA0040)
 
accessories
2x
MICROPHONE HOLDER FOR d:dicate™ (UA0961)
 
accessories
1x
STEREO BOOM FOR d:dicate™ (UA0837, UA0836)
 

Specifications

d:dicate™ Recording Microphones 3532-SP STEREO KIT WITH 4041-SP LARGE DIAPHRAGM OMNIDIRECTIONAL MICROPHONES, P48

Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Condenser w. stainless steel diaphragm
Frequency range
20 Hz - 20 kHz
Frequency range, ±2 dB
20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
Sensitivity, nominal, ±2 dB at 250 Hz
70 mV/Pa; -23 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Max. 8 dB(A) re. 20 µPa
Equivalent noise level, ITU-R BS.468-4
Max. 20 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
86 dB(A)
Total harmonic distortion (THD)
< 0.5% THD up to 120 dB SPL peak, < 1% THD up to 126 dB SPL peak
Dynamic range
Typ. 118 dB
Max. SPL, peak before clipping
134 dB
Output impedance
< 200 Ω
Cable drive capability
Up to 100 m (328 ft)
Power supply (for full performance)
Via external power supply
Current consumption
2.20 mA
Connector
3-pin XLR-M (Standard P48)
Weight
190 g (6.7 oz)
Capsule diameter
24 mm (1 in)
Microphone length
170 mm (6.7 in)
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
Matching tolerance (frequency response and sensitivity)
±0.5 dB
Phase deviation for kit
< 5°


Loading