d:dicate™

4007A OMNIDIRECTIONAL MICROPHONE, 12 MM

Product Details

MSRP $2,109.95 excl. local VAT
Product ID 4007A
The mic is a phantom powered (P48) close miking specialist with an extremely linear on-axis response in an extended frequency range from 10 Hz to 40 kHz (±2 dB).

This microphone is suitable for a wide range of applications from AB stereo pair to close-miking tasks as well as measurement requirements.
 

The microphone capsule

This high-performance condenser omni mic has an unbeatable dynamic range of 124 dB from the noise floor to 1% THD. It is capable of handling up to 160 dB SPL peak before clipping occurs.

It has, through its total acoustical transparency and ultra-high SPL handling capability, gained a reputation as being the first choice for picking up drums, percussion and brass instruments, whenever a natural and non-distorted result is paramount.

Due to its linear qualities and perfect omnidirectionality, it is also used as reference microphone in both microphone comparisons and acoustic test equipment.
 

A truly flexible range

The MMC4007 Capsule is part of the flexible d:dicate™ Microphone series. The MMC4007, with the MMP-A preamplifier, is a legendary high-SPL recording and calibration classic with natural tone and dynamics. The MMC4007, with the MMP-C compact preamplifier, provides neutral sonic and visual design with linear response in extended frequency bandwidth.

At any time, and with no tools needed, it is possible to transform the d:dicate™ 4007A Omnidirectional Microphone, 12 mm into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.

Features

The product offers the following features
Neutral, precise and versatile
Linear response up to 40 kHz
Unbeatable dynamic range
Extreme SPL handling up to 160 dB
Recording and measuring reference
Close-miking
Modular flexibility

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

WHAT'S IN THE BOX

accessories
1x
MMC4007 OMNIDIRECTIONAL MICROPHONE CAPSULE, 12 MM (MMC4007)
 
accessories
1x
MMP-A MICROPHONE PREAMP (MMP-A)
 
accessories
1x
CLIP FOR d:dicate™ (UA0639)
 
accessories
1x
FOAM WINDSCREEN FOR d:dicate™ Ø19 MM, LENGTH 56 MM (2.2 IN) (DUA0020)
 

Downloads

Specifications

d:dicate™ Recording Microphones 4007A OMNIDIRECTIONAL MICROPHONE, 12 MM

Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Pre-polarized condenser
Frequency range
10 Hz - 40 kHz
Frequency range, ±2 dB
10 Hz - 40 kHz
Sensitivity, nominal, ±2 dB at 250 Hz
9 mV/Pa; -41 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 24 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 36 dB (max. 38 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 70 dB(A)
Total harmonic distortion (THD)
< 0.5% up to 142 dB SPL peak
Dynamic range
Typ. 124 dB
Max. SPL, peak before clipping
159 dB
Switchable attenuator, filters etc.
0 dB / -20 dB
Output impedance
200 Ω
Minimum load impedance
2 kΩ
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 60 dB
Power supply (for full performance)
48 V Phantom power (±- 4 V)
Current consumption
2.8 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Weight
161 g (5.7 oz)
Microphone diameter
12 - 19 mm (0.47 - 0.75 in)
Capsule diameter
12 mm (0.47 in)
Microphone length
170 mm (6.7 in)
Maximum output voltage, RMS
8 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
Matching tolerance (frequency response and sensitivity)
±0.5 dB
Phase deviation for kit
< 5°


Loading