d:dicate™

4011F CARDIOID MICROPHONE BOOM

Customize your microphone

MSRP $1,879.95 excl. local VAT
Product ID 4011F15
This mic is part of the flexible d:dicate™ Microphones Series. It has a cardioid pickup pattern with a smooth and uniform off-axis frequency response. For music instruments, the MMC4011 Cardioid Microphone Capsule is a reference standard for its low-distortion and linear approach in an unusual huge dynamic range. With our sleek floor stands it is also a joy for the stage designer.

Due to its modular nature, the d:dicate™ 4011F Cardioid Microphone Boom can be combined with different lengths of podium booms – 15, 30 or 45 cm (6, 12 or 18 in). If longer booms are needed for floor stands with visual elegance, our long booms at 75 or 120 cm (30 or 48 in) make a high-quality stage voice mic together with our dedicated accessories.
 

The microphone capsule

The principal appeal of the MMC4011 Cardioid Microphone Capsule is its directional quality and attention to detail. This mic makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources.

It is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals as it is for spot-miking symphonies. It can handle incredibly high sound levels and even includes a 20 dB pad switch in the center of the XLR connector to attenuate the output of the microphone.

A flat on-axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.
 

Boom lenghts

The 4011F is available in five lengths:
 
  • 20 cm (8 in), 32 cm (13 in) and 47 cm (18 in) boom intended for podium solutions
 
  • 77 cm (30 in) and 122 cm (48 in) for floor stand applications.
 

A truly flexible range

This mic is part of the flexible d:dicate™ Microphone Series. At any time, and with no tools needed, it is possible to transform the d:dicate™ 4011F Cardioid Microphone into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.


Order numbers: 4011F15, 4011F30, 4011F45, 4011F75, 4011F120.
 

Features

The product offers the following features
Great for high sound levels
Accurate sound
Colorless sound
Ultimate podium or floor mic
Modular flexibility

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

WHAT'S IN THE BOX

accessories
1x
MMC4011 CARDIOID MICROPHONE CAPSULE (MMC4011)
 
accessories
1x
MMP-F MODULAR ACTIVE BOOM (MMP-F)
 
accessories
1x
CLIP FOR d:dicate™ (UA0639)
 
accessories
1x
FOAM WINDSCREEN FOR d:dicate™ Ø19 MM, LENGTH 56 MM (2.2 IN) (DUA0020)
 

Downloads

Specifications

d:dicate™ Recording Microphones 4011F CARDIOID MICROPHONE BOOM

Directional pattern
Cardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in)
40 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 1 kHz
10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 25 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 76 dB(A)
Total harmonic distortion (THD)
< 1% up to 139 dB SPL peak
Dynamic range
Typ. 121 dB
Max. SPL, peak before clipping
144 dB
Output impedance
100 Ω
Minimum load impedance
2 kΩ
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing
Common mode rejection ratio (CMRR)
> 40 dB
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
3.5 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Microphone diameter
19 mm (0.75 in)
Capsule diameter
19 mm (0.75 in)
Microphone length
Capsule: 23 mm (0.9 in), Boom poles: 20 cm (8 in), 32 cm (13 in), 47 cm (18 in), 77 cm (30 in), 122 cm (48 in)
Maximum output voltage, RMS
2.2 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
Matching tolerance (frequency response and sensitivity)
±1 dB
Phase deviation for kit
< 10°


Loading