d:dicate™

4017C SHOTGUN MICROPHONE, COMPACT

Product Details

MSRP $1,629.95 excl. local VAT
Product ID 4017C
At just 154 mm (6.1 in) and 70 g (2.5 oz), this mic sets new standards for compactness within shotgun microphones and their applications. At the same time, it offers impressive accuracy, clarity and musicality.

The mic is fully immune to RF emission and the 19 mm (0.75 in) condenser cartridge is capable of handling peak SPLs of 152 dB before clipping. Designed for a broad range of applications, the d:dicate™ Microphones Series is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast/ENG/film booming and even studio recording environments.
 

The microphone capsule

The d:dicate™ 4017C Shotgun Microphone, Compact is equipped with a highly-directional hypercardioid pickup pattern; obtained using a supercardioid design with an interference tube that provides excellent off-axis rejection. Its unique directional pattern is useful when you need exceptionally high directivity with high background noise rejection. It is convenient when you cannot place the mic close enough to the sound source. The MMP-C preamplifier makes booming applications such as in a car or in low-ceiling rooms is uncomplicated.

Extensive research and development has been undertaken to optimize the sound coming from the sides and back of the microphone. One of the key accomplishments is that we have minimized often very un-linear response of a shotgun microphone due to its side lobes. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications.

The d:dicate™ 4017C Shotgun Microphone, Compact is also available with Rycote Windshield and suspension system – a fully-packed and ready-to-go solution.

At any time, and with no tools needed, it is possible to transform the d:dicate™ 4017C Shotgun Microphone, Compact into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.


DPA’s d:dicate 4017B is much lighter in weight than the other industry standard shotgun microphones I own. My boom ops and I love lightening our load whenever possible. The shorter length and lighter weight doesn’t sacrifice the mic’s sound and is ideal in all scenarios.

Review by Sergio Reyes from Serge Sound on Behalf of Post Magazine.

Features

The product offers the following features
Small and lightweight
Excellent RF Immunity
Uniform off-axis response
Highly directional pattern

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

WHAT'S IN THE BOX

accessories
1x
MMC4017 SHOTGUN MICROPHONE CAPSULE (MMC4017)
 
accessories
1x
MMP-C COMPACT MICROPHONE PREAMP (MMP-C)
 
accessories
1x
CLIP FOR d:dicate™ (UA0639)
 
accessories
1x
FOAM WINDSCREEN FOR d:dicate™ Ø19 MM, LENGTH 56 MM (2.2 IN) (DUA0020)
 

Downloads

Specifications

d:dicate™ Recording Microphones 4017C SHOTGUN MICROPHONE, COMPACT

Directional pattern
Supercardioid, lobe-shaped
Principle of operation
Pressure gradient, with interference tube
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ±2 dB, at 60 cm (23.6 in)
40 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz
Sensitivity, nominal, ±2 dB at 1 kHz
19 mV/Pa; -34.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 24 dB (max. 26 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 81 dB(A)
Total harmonic distortion (THD)
< 1% up to 137 dB SPL peak
Dynamic range
Typ. 124 dB
Max. SPL, peak before clipping
146 dB
Output impedance
100 Ω
Minimum load impedance
2 kΩ
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 50 dB
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
2.8 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Weight
70 g (2.5 oz)
Microphone diameter
19 mm (0.75 in)
Capsule diameter
19 mm (0.75 in)
Microphone length
154 mm (6 in)
Maximum output voltage, RMS
4.5 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%


Loading