d:dicate™

ST4006C STEREO PAIR WITH TWO 4006C, CLIPS AND WINDSCREENS IN PELI™ CASE

Product Details

MSRP $3,709.95 excl. local VAT
Product ID ST4006C
Whenever a small, lightweight, inconspicuous microphone for top-quality recording is required, a d:dicate™ 4006C Microphone is the right choice. They come as a hand-matched pair that offers the truest capture of stereo sound available.

Even though the standard tolerances on our d:dicate™ microphones are extremely low, a stereo match is even closer. These specially selected d:dicate™ 4006C microphones are matched within ±0.5 dB on both frequency response and sensitivity.

The pair comes in a heavy-duty Peli™ Case for safe transportation and easy access to the microphones and accessories.
 

The mic capsule

The MMC4006 Omnidirectional Microphone Capsule offers total transparency in any recording situation. It picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 to 20 kHz (±2 dB).

A selection of optional accessories can be purchased,, including acoustic pressure equalizers, a nose cone and interchangeable protection grids. These accessories can acoustically transform the mic. By changing grids, it is possible to gain several unique frequency responses and directional characteristics from the mic. Furthermore, these accessories will not produce any phase shift, noise or distortion that would otherwise be introduced by an electrical filter.
 

A truly flexible range

The d:dicate™ 4006C Omnidirectional Microphone, Compact is part of the flexible d:dicate™ Microphones Series. It combines the MMC4006 Omnidirectional Capsule with the MMP-C compact preamplifier. This combination offers a subtle character alteration with a bit more “body” to the low end than the d:dicate™ 4006A Omnidirectional Microphone.

Another option, for the true audiophile, is the d:dicate™ 4006A Omnidirectional Microphone. It offers low distortion and totally accurate and faithful sound.

At any time, and with no tools needed, it is possible to transform the d:dicate™ 4006C Omnidirectional Microphone, Compact into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.

The d:dicate™ 4006C Omnidirectional Microphone, Compact is also available individually.

Features

The product offers the following features
Carefully matched microphones
Natural sound
High sensitivity
Low noise-floor
Extremely linear frequency
Sturdy Peli™ Case for transportation and protection

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

WHAT'S IN THE BOX

accessories
2x
MMC4006 OMNIDIRECTIONAL MICROPHONE CAPSULE (MMC4006)
 
accessories
2x
MMP-C COMPACT MICROPHONE PREAMP (MMP-C)
 
accessories
2x
CLIP FOR d:dicate™ (UA0639)
 
accessories
2x
FOAM WINDSCREEN FOR d:dicate™ Ø19 MM, LENGTH 56 MM (2.2 IN) (DUA0020)
 
accessories
2x
FREE-FIELD GRID FOR d:dicate™ 4006 (DD0251)
 
accessories
2x
CLOSE-MIKING GRID, TRAPEZOID, SILVER (DD0254)
 
accessories
2x
DIFFUSE-FIELD GRID FOR d:dicate™ 4003 and 4006, BLACK (DD0297)
 
accessories
1x
PELI™ CASE FOR d:dicate™ MICROPHONES (KE0002)
 

Downloads

Specifications

d:dicate™ Recording Microphones ST4006C STEREO PAIR WITH TWO 4006C, CLIPS AND WINDSCREENS IN PELI™ CASE

Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Pre-polarized condenser
Frequency range
10 Hz - 20 kHz
Frequency range, ±2 dB
20 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz
40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 27 dB (max. 29 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 79 dB(A)
Total harmonic distortion (THD)
< 1% up to 134 dB SPL peak
Dynamic range
Typ. 119 dB
Max. SPL, peak before clipping
139 dB
Output impedance
100 Ω
Minimum load impedance
2 kΩ
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 50 dB
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
2.8 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Weight
63 g (2.2 oz)
Microphone diameter
16 - 19 mm (0.6 - 0.75 in)
Capsule diameter
16 mm (0.6 in)
Microphone length
64 mm (2.5 in)
Maximum output voltage, RMS
4.5 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
Matching tolerance (frequency response and sensitivity)
±0.5 dB
Phase deviation for kit
< 5°


Loading