d:dicate™

ST4011A STEREO PAIR WITH TWO 4011A, CLIPS AND WINDSCREENS IN PELI™ CASE

Product Details

MSRP $3,659.95 excl. local VAT
Product ID
Even though the standard tolerances on our d:dicate™ microphones are extremely low, a stereo match is even closer. These specially selected d:dicate™ 4011A microphones are matched within ±1 dB on both frequency response and sensitivity.

The pair comes in a heavy-duty Peli™ Case for safe transportation and easy access to the microphones and accessories.

This condenser microphone is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.
 

The microphone capsule

The principal appeal of the MMC4011 Cardioid Microphone Capsule is its directional quality and attention to detail. This mic makes everything sounds like the original. The first-order cardioid pickup pattern provides superb separation between sound sources.

It is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals as it is for spot-miking symphonies. It can handle incredibly high sound levels and even includes a 20 dB pad switch in the center of the XLR connector to attenuate the output of the microphone.

A flat on-axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pickup pattern.
 

A truly flexible range

This mic is part of the flexible d:dicate™ Microphone Series. At any time, and with no tools needed, it is possible to transform the d:dicate™ 4011A Cardioid Microphone into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.

The d:dicate™ 4011A Cardioid Microphone is also available individually.

Features

The product offers the following features
Close-miking
Great for high sound levels
Carefully matched within ±1 dB
Accurate sound
Colorless sound
Peli™ Case transportation and protection
Modular flexibility

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

Sting using d:dicate™ 4011 Cardioid Microphone on vocals

Open video

WHAT'S IN THE BOX

accessories
2x
MMC4011 CARDIOID MICROPHONE CAPSULE (MMC4011)
 
accessories
2x
MMP-A MICROPHONE PREAMP (MMP-A)
 
accessories
2x
CLIP FOR d:dicate™ (UA0639)
 
accessories
2x
FOAM WINDSCREEN FOR d:dicate™ Ø19 MM, LENGTH 56 MM (2.2 IN) (DUA0020)
 
accessories
1x
PELI™ CASE FOR d:dicate™ MICROPHONES (KE0002)
 

Downloads

Specifications

d:dicate™ Recording Microphones ST4011A STEREO PAIR WITH TWO 4011A, CLIPS AND WINDSCREENS IN PELI™ CASE

Directional pattern
Cardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in)
40 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 1 kHz
10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 76 dB(A)
Total harmonic distortion (THD)
< 1% up to 139 dB SPL peak
Dynamic range
Typ. 121 dB
Max. SPL, peak before clipping
159 dB
Switchable attenuator, filters etc.
0 dB / -20 dB
Output impedance
200 Ω
Minimum load impedance
2 kΩ
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 60 dB
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
2.8 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Weight
158 g (5.6 oz)
Microphone diameter
19 mm (0.75 in)
Capsule diameter
19 mm (0.75 in)
Microphone length
170 mm (6.7 in)
Maximum output voltage, RMS
> 5 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%


Loading