d:mension™

5006A SURROUND KIT WITH FIVE d:dicate™ 4006A, CLIPS AND WINDSCREENS IN PELI™ CASE

Product Details

MSRP $9,109.95 excl. local VAT
Product ID 5006A
This is a complete Surround Kit with five carefully factory-matched omnidirectional microphones. Even though the standard tolerances on the d:dicate™ 4006A Omnidirectional Microphones are extremely low, the surround match is even closer.

The specially selected d:dicate™ 4006A Omnidirectional Microphones are matched within ±0.5 dB on both frequency response and sensitivity from mean of set.

The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the d:dicate™ 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings. The precise reproduction, total transparency and natural-sounding clarity of d:dicate™ 4006A Omnidirectional Microphones will provide you with a lifetime of satisfying listening.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.

Bundle deal

You save 500 EUR off the list price when you buy S5 Surround Mount along with this Matched Surround Kit. The deal also applies to:

d:mension™ 5006-11A Surround Kit with d:dicate™ 4006A Omnidirectional and d:dicate™ 4011A Cardioid Microphones

d:mension™ 5015A Surround Kit with dicate™ 4015 Wide Cardioid Microphones

Features

The product offers the following features
Wide pickup area and natural sound
Five carefully matched microphones
Ambience pickup with convenient directionality
Peli™ Case transportation and protection

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

d:dicate™ 4006 Omnidirectional Microphone on guitar and d:dicate™ 4003 Omnidirectional microphone, 130V, on vocal

Open video

WHAT'S IN THE BOX

accessories
5x
MMC4006 OMNIDIRECTIONAL MICROPHONE CAPSULE (MMC4006)
 
accessories
5x
MMP-A MICROPHONE PREAMP (MMP-A)
 
accessories
5x
CLIP FOR d:dicate™ (UA0639)
 
accessories
5x
FOAM WINDSCREEN FOR d:dicate™ Ø19 MM, LENGTH 56 MM (2.2 IN) (DUA0020)
 
accessories
5x
FREE-FIELD GRID FOR d:dicate™ 4006 (DD0251)
 
accessories
5x
CLOSE-MIKING GRID, TRAPEZOID, SILVER (DD0254)
 
accessories
5x
DIFFUSE-FIELD GRID FOR d:dicate™ 4003 and 4006, BLACK (DD0297)
 
accessories
1x
PELI™ CASE FOR d:dicate™ MICROPHONES (KE0002)
 

Downloads

Specifications

5006A SURROUND KIT WITH FIVE d:dicate™ 4006A, CLIPS AND WINDSCREENS IN PELI™ CASE

Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Pre-polarized condenser
Frequency range
10 Hz - 20 kHz
Frequency range, ±2 dB
10 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz
40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 27 dB (max. 29 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 79 dB(A)
Total harmonic distortion (THD)
< 1% up to 139 dB SPL peak
Dynamic range
Typ. 124 dB
Max. SPL, peak before clipping
146 dB
Switchable attenuator, filters etc.
0 dB / -20 dB
Output impedance
200 Ω
Minimum load impedance
2 kΩ
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 60 dB
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
2.8 mA
Connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color
Matte black
Weight
163 g (5.7 oz)
Microphone diameter
16 - 19 mm (0.6 - 0.75 in)
Capsule diameter
16 mm (0.6 in)
Microphone length
170 mm (6.7 in)
Maximum output voltage, RMS
8 V
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
Matching tolerance (frequency response and sensitivity)
±0.5 dB
Phase deviation for kit
< 5°


Loading