d:screet™

HEAVY DUTY 4061 OMNIDIRECTIONAL MICROPHONE, LO-SENS

Customize your microphone

MSRP $459.95 excl. local VAT
Product ID SCO61B00-H
The d:screet™ 4061 Heavy Duty Miniature Omnidirectional Microphone, Lo-Sens offers a very clean, detailed and natural sound quality.

The d:screet™ Heavy Duty Mic Series contains our toughest miniature microphones. Made for situations where you require maximum security and where visual size of the mic is less important. The d:screet™ Heavy Duty Mic Series features a stainless steel housing, a heavy-duty cable relief and a thick 2.2 mm (0.9 in) cable.

The d:screet™ 4061 Heavy Duty Miniature Omnidirectional Microphone, Lo-Sens was originally designed for use with wireless systems in theater, television and close-miked instrument applications. Because of its small size, it exhibits an exceedingly accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve quality pickup. 

This microphone is acoustically identical to the d:screet™ 4060 Heavy Duty Miniature Omnidirectional Microphone, Hi-Sens, but the sensitivity is adjusted to match some of the more sensitive transmitters on the market.

It is up to the user to decide on the correct placement to achieve the desired timbre. The mic can handle 144 dB peak before clipping, allowing the microphone to be used even for snare drums, guitar/bass speaker cabinets or other high SPL sound sources.
 

Flexible adapter system

The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.

The d:fine™, d:screet™ and d:vote™ series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones’ ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.

Find the adapter that fits your wireless system.


Order numbers: SCO61B00-H, SCO61F00-H.

Features

The product offers the following features
Extremely rugged and reliable
Stainless steel housing, heavy-duty cable relief and thick cable
Exceptional audio quality
Low noise and high sensitivity
Large selection of accessories
Modular adapter system fits most professional wireless systems

Where to buy

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

d:screet™ Heavy Duty Microphone vs a saw

Open video

WHAT'S IN THE BOX

d:screet™
1x
HEAVY DUTY 4061 OMNIDIRECTIONAL MICROPHONE, LO-SENS
 
accessories
1x
MINIATURE GRID, SOFT BOOST FOR d:screet™ AND d:fine™
 
accessories
1x
MINIATURE GRID, HIGH BOOST FOR d:screet™ AND d:fine™
 

DOWNLOADS

Specifications

d:screet™ HEAVY DUTY 4061 OMNIDIRECTIONAL MICROPHONE, LO-SENS

Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ±2 dB
Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 68 dB(A)
Total harmonic distortion (THD)
< 1% up to 123 dB SPL peak
Dynamic range
Typ. 97 dB
Max. SPL, peak before clipping
144 dB
Output impedance
From MicroDot: 30 - 40 Ω. From DAD6001: 100 Ω
Cable drive capability
Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle
Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR)
> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance)
Min. 5 V to max. 50 V through DPA adapter for wireless systems
Current consumption
Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector
MicroDot
Color
Black or beige
Weight
13 g (0.46 oz) incl. Cable and MicroDot connector
Microphone diameter
5.4 mm (0.21 in)
Microphone length
17.6 mm (0.7 in)
Cable length
1.8 m (5.9 ft)
Cable color
Black or beige
Cable diameter
2.2 mm (0.09 in)
Polarity
Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%


Loading