d:screet™

SC4098 SUPERCARDIOID FLOOR STAND MICROPHONE

Customize your microphone

Boom pole length
MSRP $1,034.95 excl. local VAT
Product ID SC4098-BX-FGS
A complete supercardioid microphone floor stand solution in the d:screet™ Miniature Microphone Series offering a high-quality stage voice or instrument mic.

The floor stand has an elegant and exclusive design with a black, non-reflective surface specifically made to handle the, from time to time, rough life in TV-studios, OB-vans and onstage in theaters and concert halls. The Floor Base has an integrated shock mounting solution. The thread screw holds the Stand Extension and Active Boom Pole. This unique design allows for a long stage microphone boom pole that does not swing, but rapidly stabilizes itself after being positioned. 
 

This floor stand solution comes in two standard lengths:

d:screet™ 4098FJS Supercardioid Microphone, XLR, 77 cm (30 in) Boom, Floor Stand
d:screet™ 4098FGS Supercardioid Microphone, XLR, 122 cm (48 in) Boom, Floor Stand

Interested in a wireless floor microphone solution? Take a look at our d:screet™
SC4098 Supercardioid Podium Microphone boom
.

 

The microphone

With very low noise and a high sensitivity, d:screet™  Supercardioid Microphones offer the most clear, transparent, and natural sound available on the miniature mic market. The mics are capable of handling extremely high SPL before clipping. With a linear response, low distortion and an extremely large dynamic range, they sound great no matter how challenging the environment.


Order numbers: SC4098-BX-FGS, SC4098-BX-FJS.

Features

The product offers the following features
Outstanding audio quality
Highly directional – very isolated
High rejection of radio frequency interference
Sleek Scandinavian design

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

WHAT'S IN THE BOX

d:screet™ miniature microphones
1x
SC4098 SUPERCARDIOID PODIUM MICROPHONE BOOM
 
accessories
1x
SWIVEL JOINT, SINGLE (SJS4001)
 
accessories
1x
STAND EXTENSION, 600 MM (23.6 IN) (DUA0600)
 
accessories
1x
FLOOR BASE, Ø250 MM (9.8 IN) (DUA0250)
 

Downloads

Specifications

d:screet™ Miniature Microphones SC4098 SUPERCARDIOID FLOOR STAND MICROPHONE

Directional pattern
Supercardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ± 2 dB, at 20 cm (7.9 in)
100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz
16 mV/Pa; -36 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 35 dB (max. 38 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 71 dB(A)
Total harmonic distortion (THD)
< 1% up to 125 dB SPL peak
Dynamic range
Typ. 102 dB
Max. SPL, peak before clipping
135 dB
Output impedance
From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001 XLR Adapter: 100 Ω
Minimum load impedance
2 kΩ
Cable drive capability
Up to 300 m (984 ft) with XLR connector or DAD6001 XLR Adapter
Output balance principle
Signal balanced with XLR connector og DAD6001 XLR Adapter
Common mode rejection ratio (CMRR)
> 60 dB from 50 Hz to 15 kHz with DAD6001 XLR Adapter
Power supply (for full performance)
48 V phantom power ±4 V
Current consumption
Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR Adapter
Connector
XLR-3M
Color
Black
Weight
Boom pole 77 cm (30 in): 115 g (4.1 oz)
Boom pole 122 cm (48 in): 127 g (4.5 oz)
Microphone diameter
10 mm (0.4 in)
Capsule diameter
5.4 mm (0.21 in)
Microphone length
Boom poles: 77 cm (30 in), 122 cm (48 in)
Polarity
+V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001 XLR adapter)
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%


Loading