d:screet™

SMK-SC4060 STEREO MICROPHONE KIT WITH d:screet™ 4060

Product Details

MSRP $949.95 excl. local VAT
Product ID SMK-SC4060
This d:screet™ Stereo Microphone Kit is a cost-effective and flexible stereo recording solution aimed at project studios and for discreet mic setup on stage. A complete stereo pair; two handpicked omnidirectional condenser microphones, selected on sensitivity within ±1.5 dB.

It combines two d:screet™ SC4060 Omnidirectional Miniature Microphones, Hi-Sens, with a variety of mounting accessories. These include the BLM6000 Boundary Layer Mount, which can be used in conjunction with our d:screet™ 4060, 4061, 4062 and 4063 Miniature Microphones to place on a reflective boundary such as a floor, wall, ceiling, piano lid etc. This enables the mics to capture the ambient sound of the area. The sound captured from this “pressure zone” has higher sensitivity, clarity and intelligibility compared to the sound captured from the "free air". This solution serves as a kind of acoustical zoom.

There are many accessories included in the kit. One of them is the DMM0007 Universal Surface Mount. This mount allows all kinds of instruments, from acoustic guitar through grand piano and drums, to be mounted in the best-sounding position. The mount uses special non-marking adhesive discs for attachment.

The d:screet™ Stereo Microphone Kit is also available with d:screet™ SC4061 Miniature Omnidirectional Microphones, Lo-Sens.
 

Flexible adapter system

The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.

microdot adapters overview

The d:fine™, d:screet™ and d:vote™ series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones’ ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.

Find the adapter that fits your wireless system.

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

WHAT'S IN THE BOX

d:screet™ miniature microphones
2x
4060 MINIATURE OMNIDIRECTIONAL MICROPHONE, HI-SENS
 
accessories
2x
BOUNDARY LAYER MOUNT for d:screet™ (BLM6000-B)
 
accessories
2x
ADAPTER FOR MICRODOT TO 3-PIN XLR WITH BELT CLIP (DAD6001-BC)
 
accessories
1x
UNIVERSAL SURFACE MOUNT (DMM0007)
 
accessories
2x
MAGNET MOUNT FOR d:screet™ MINIATURE OMNIDIRECTIONAL MICROPHONES (DMM0011)
 
accessories
2x
MICROPHONE HOLDER FOR STRINGS (MHS6005)
 
accessories
2x
FOAM WINDSCREEN FOR d:screet™ AND d:fine™ (DUA0560)
 

Downloads

Specifications

d:screet™ Miniature Microphones SMK-SC4060 STEREO MICROPHONE KIT WITH d:screet™ 4060

Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ±2 dB
Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz
20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 35 dB (max. 38 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
71 dB(A)
Total harmonic distortion (THD)
< 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine
Dynamic range
Typ. 100 dB
Max. SPL, peak before clipping
134 dB
Output impedance
30 - 40 Ω
Cable drive capability
Up to 300 m (984 ft)
Power supply (for full performance)
For wireless For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
Connector
MicroDot
Color
Black, beige, brown or white
Weight
7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter
5.4 mm (0.21 in)
Microphone length
12.7 mm (0.5 in)
Cable length
3 m (9.8 ft)
Polarity
Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%
Sensitivity selection tolerance (at 1 kHz)
±1.5 dB


SIMILAR MICROPHONES

Loading