Accessory

MMP-A MICROPHONE PREAMP (MMP-A)

Product Details

MSRP $509.95 excl. local VAT
Product ID MMP-A
Ultra-transparent, transformerless preamplifier with active drive for impedance balancing.

You can combine this preamplifier with any modular capsule in the d:dicate™ Microphones Series.

To learn more read our Microphone University article: Impedance balancing with Active Drive vs transformer coupled outputs.

Specifications

accessories MMP-A MICROPHONE PREAMP (MMP-A)

Output connector
XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Low-cut frequency, -3 dB
8 Hz
Noise with shorted input A-weighted
0.5 µV
Output voltage, RMS
> 5 V
Output voltage, peak
> 16 V
Type of electronic circuit
Active
THD@1VRMS, 1kHz
< 0.2 %
Dynamic range
138 dB
Switchable attenuator, filters etc.
0 dB, -20 dB
Output impedance
< 200 ohm
Cable drive capability
100 m (328 ft)
Output balance principle
Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)
> 60 dB
Power supply (for full performance)
48 V Phantom power (± 4 V)
Current consumption
2.8 mA
Color
Matte black
Weight
140 g (4.9 oz)
Diameter
19 mm (0.75 in)
Length
147 mm (5.8 in)
Temperature range
-40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity (RH)
Up to 90 %


Loading