d:dicate™

4003 OMNIDIRECTIONAL MICROPHONE, 130 V

Product Details

MSRP 1.945,00 € excl. local VAT
Product ID 4003
The d:dicate™ 4003 Omnidirectional Microphone, 130 V is acoustically identical with the studio standard d:dicate™ 4006 Omnidirectional Microphone, but differs in the powering system.

An omnidirectional high-voltage (130 V) condenser microphone with extremely linear frequency response and extended low frequency handling capability (-2 dB at 10 Hz). Its high sensitivity and low noise-floor makes the microphone the perfect choice for all professional recordings.

The hi-voltage system enables the mic to handle approximately 10 dB higher SPL than the d:dicate™ 4006 Omnidirectional Microphone. The impressive dynamic range of the mic, together with the wide range of acoustic pressure equalizers and protection grids puts the top-tier of studio quality microphones.

Features

The product offers the following features
Detailed and natural reproduction
High sensitivity and low noise-floor
Excellent for concert halls and spot miking acoustical instruments

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

d:dicate™ 4006 Omnidirectional Microphone on guitar and d:dicate™ 4003 Omnidirectional microphone, 130V, on vocal

Open video

WHAT'S IN THE BOX

d:dicate™ recording microphones
1x
4003 OMNIDIRECTIONAL MICROPHONE, 130 V
 
accessories
1x
FREE-FIELD GRID FOR d:dicate™ 4006 (DD0251)
 
accessories
1x
CLOSE-MIKING GRID, TRAPEZOID, SILVER (DD0254)
 
accessories
1x
DIFFUSE-FIELD GRID FOR d:dicate™ 4003 and 4006, BLACK (DD0297)
 
accessories
1x
FOAM WINDSCREEN FOR d:dicate™ 4003 AND 4006 (UA0638)
 
accessories
1x
CLIP FOR d:dicate™ (UA0639)
 

Specifications

d:dicate™ Recording Microphones 4003 OMNIDIRECTIONAL MICROPHONE, 130 V

Directional pattern
Omnidirectional
Principle of operation
Pressure
Cartridge type
Pre-polarized condenser
Frequency range
10 Hz - 20 kHz
Frequency range, ±2 dB
10 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz
40 mV/Pa; -28 dB re. 1 V/Pa unloaded
Equivalent noise level, A-weighted
Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 27 dB (max. 29 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
79 dB
Total harmonic distortion (THD)
< 0.5% up to 129 dB SPL peak, < 1% up to 135 dB SPL peak
Dynamic range
Typ. 120 dB
Max. SPL, peak before clipping
154 dB SPL peak (f< 4 kHz)
Output impedance
< 75 Ω
Cable drive capability
Up to 300 m (984 ft)
Power supply (for full performance)
130 V
Connector
4-pin modified XLR-M (High Voltage)
Weight
150 g (5.3 oz)
Capsule diameter
16 mm (0.6 in)
Microphone length
165 mm (6.5 in)
Temperature range
-10°C to 50°C (14°F to 122°F)
Relative humidity (RH)
Up to 90%


Loading