d:screet™

SCDM4098-B SUPERCARDIOID TABLETOP MICROPHONES

Customize your microphone

MSRP $730.00 excl. local VAT
Product ID SCDM4098-BM45
*Adapter required
Find adapter
A complete, supercardioid tabletop microphone solution, which is ideal for either permanently affixing to or temporarily placed on a table in conference venues, meeting rooms and board rooms. 

This solution can be scaled up as needed. In smaller rooms you might only need one microphone to capture the best sound. In larger settings, you can use multiple d:screet™ Supercardioid Tabletop Microphones to ensure each area of the room is completely covered. The best audio quality is obtained in a one-to-one solution – one microphone position close to one speaker. Read more about microphones in installed systems.
 

Combined with d:screet™ SC4098

With very low noise and a high sensitivity, d:screet™ Supercardioid Tabletop Microphones offer the most clear, transparent, and natural sound available on the miniature mic market. They ensure maximum speech intelligibility regardless of the acoustical environment. With a linear response, low distortion and an extremely large dynamic range, they sound great in any environment.

The Microphone Base is made specifically to work with the d:screet™ SC4098 Supercardioid Podium Microphone. It has an elegant yet unobtrusive design with a black, non-reflective surface and integrated shock mount, which ensures that vibrations from people touching the table as well as reverberations from people walking in and out of the room will not affect the sound. The audio cables are an integral part of the Microphone Base unit. 

The standard tabletop solution is equipped with a 43 cm (17 in), black gooseneck and comes in three standard kits to meet your exact needs:
 
  • d:screet™ Tabletop Microphone, 43 cm (17 in), Black with MicroDot (unbalanced)
  • d:screet™ Tabletop Microphone, 43 cm (17 in), Black Unterminated, P48 (balanced)
  • d:screet™ Tabletop Microphone, 43 cm (17 in), Black with XLR (balanced)

Other gooseneck lengths can be ordered separately as well. We recommend tabletop solutions with goosenecks in 16cm (6 in), 28 cm (11 in) and 43 cm (17 in) versions. Longer goosenecks should be avoided.

Order numbers: 
 
  • SCDM4098-BM45 - d:screet™ Supercardioid Tabletop Microphone, 43 cm, Black with MicroDot
  • SCDM4098-BU45 - d:screet™ Supercardioid Tabletop Microphone, 43 cm, Black, Unterminated, P48
  • SCDM4098-BX45 - d:screet™ Supercardioid Tabletop Microphone, 43 cm, Black with XLR, P48

The Microphone Base can also be purchased separately. Also, see our other offerings within installation.
 

Features

The product offers the following features:
Outstanding audio quality
Slim, elegant Scandinavian design
Highly directional – very isolated
High rejection of radio frequency interference
Meets the needs of architects, AV consultants, system integrators and installing electricians

WHERE TO BUY

Are you ready to buy a DPA microphone or accessory? Let us help you find the store closest to you.
Locate Store

WHAT'S IN THE BOX

accessories
1x
MICROPHONE BASE (DM6000)
 
d:screet™ miniature microphones
1x
SC4098 SUPERCARDIOID PODIUM MICROPHONE BOOM
 

Downloads

Specifications

d:screet™ Miniature Microphones SCDM4098-B SUPERCARDIOID TABLETOP MICROPHONES

Directional pattern
Supercardioid
Principle of operation
Pressure gradient
Cartridge type
Pre-polarized condenser
Frequency range
20 Hz - 20 kHz
Frequency range, ± 2 dB, at 20 cm (7.9 in)
MicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz
XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
Sensitivity, nominal, ±3 dB at 1 kHz
16 mV/Pa; -36 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 35 dB (max. 38 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 71 dB(A)
Total harmonic distortion (THD)
< 1% up to 125 dB SPL peak
Dynamic range
Typ. 102 dB
Max. SPL, peak before clipping
135 dB
Output impedance
From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001 XLR Adapter: 100 Ω
Minimum load impedance
2 kΩ
Cable drive capability
Up to 300 m (984 ft) with XLR connector or DAD6001 XLR Adapter
Output balance principle
Signal balanced with XLR connector og DAD6001 XLR Adapter
Common mode rejection ratio (CMRR)
> 60 dB from 50 Hz to 15 kHz with DAD6001 XLR Adapter
Power supply (for full performance)
MicroDot: Min. 5 V to max. 50 V through DPA adapter for wireless systems
XLR-3M: 48 V phantom power ±4 V (will work from 12 V)
Unterminated leads: 48 V phantom power ±4 V (will work from 12 V)
Current consumption
Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR Adapter
Connector
MicroDot, XLR-3M or Unterminated leads
Color
Black
Weight
368 g (13.0 oz)
Microphone diameter
10 mm (0.4 in)
Capsule diameter
5.4 mm (0.21 in)
Microphone length
43 cm (17 in)
Polarity
+V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001 XLR adapter)
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%


Loading