The 5100 Mobile Surround Microphone is a completely self-contained plug-and-play solution for 5.1 audio capture. It brings engaging surround ambience to sport events, documentaries and other HDTV productions.
Specifications
Directional pattern
Directional
Principle of operation
Pressure, with interferece tube and separation baffles
Cartridge type
Pre-polarized condenser element
Frequency response
L, C, R, LS, RS: 20 Hz to 20 kHz; LFE: 20 Hz to 120 Hz
Effective frequency range ±2 dB
L, C, R: 200 Hz to 16 kHz; LS, RS: 100 Hz to 12 kHz; LFE: 20 Hz to 120 Hz
Sensitivity, nominal, ±3 dB at 1 kHz
L, C, R: 26 mV/Pa; LS, RS: 28 mV/Pa
Equivalent noise level, A-weighted
L, C, R: Typ. 18 dB(A) (max. 21 dB(A)); LS, RS: Typ. 20 dB(A) (max. 23 dB(A))
Equivalent noise level, ITU-R BS.468-4
L, C, R: Typ. 29 dB (max. 32 dB); LS, RS: Typ. 31 dB (max. 34 dB)
Distortion, THD < 1%
120 dB SPL RMS, 123 dB SPL peak
Dynamic range
L, C, R, LS, RS: 103 dB; LFE: 100 dB
Max. SPL, THD 10%
132 dB SPL peak
Rated output impedance
50 Ω
Cable drive capability
100 m (328 ft)
Output balance principle
Active Signal balanced
Common mode rejection ratio (CMRR)
60 dB, 50 Hz - 20 kHz
Power supply (for full performance)
P48 (Phantom Power)
Current consumption
Typ. 5 mA (max. 5.5 mA)
Connector
Lemo multipin
Weight
500 g (17.6 oz)
Microphone diameter
W: 240 mm (9.4 in), H: 140 mm (5.5 in), D: 195 mm (7.7 in)
Capsule diameter
5.4 mm (0.21 in)
Cable length
5 m (16.4 ft)
Cable diameter
9.3 mm (0.37 in)
Maximum output voltage
L, C, R, LS, RS: 1,8 Vrms / 2,5 Vpeak; LFE: 1 Vrms / 1,4 Vpeak
Polarity
+V at pin 2 for positive sound pressure
Temperature range
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%