The 5100 Mobile Surround Microphone is a completely self-contained plug-and-play solution for 5.1 audio capture. It brings engaging surround ambience to sport events, documentaries and other HDTV productions.
Specifications
Relative humidity (RH)
Up to 90%
Sensitivity, nominal, ±3 dB at 1 kHz
L, C, R: 26 mV/Pa; LS, RS: 28 mV/Pa
Output balance principle
Active Signal balanced
Maximum output voltage
L, C, R, LS, RS: 1,8 Vrms / 2,5 Vpeak; LFE: 1 Vrms / 1,4 Vpeak
Effective frequency range ±2 dB
L, C, R: 200 Hz to 16 kHz; LS, RS: 100 Hz to 12 kHz; LFE: 20 Hz to 120 Hz
Max. SPL, THD 10%
132 dB SPL peak
Temperature range
-40°C to 45°C (-40°F to 113°F)
Frequency response
L, C, R, LS, RS: 20 Hz to 20 kHz; LFE: 20 Hz to 120 Hz
Cable length
5 m (16.4 ft)
Dynamic range
L, C, R, LS, RS: 103 dB; LFE: 100 dB
Power supply (for full performance)
P48 (Phantom Power)
Current consumption
Typ. 5 mA (max. 5.5 mA)
Rated output impedance
50 Ω
Equivalent noise level, ITU-R BS.468-4
L, C, R: Typ. 29 dB (max. 32 dB); LS, RS: Typ. 31 dB (max. 34 dB)
Capsule diameter
5.4 mm (0.21 in)
Directional pattern
Directional
Cable diameter
9.3 mm (0.37 in)
Cartridge type
Pre-polarized condenser element
Distortion, THD < 1%
120 dB SPL RMS, 123 dB SPL peak
Common mode rejection ratio (CMRR)
60 dB, 50 Hz - 20 kHz
Cable drive capability
100 m (328 ft)
Principle of operation
Pressure, with interferece tube and separation baffles
Connector
Lemo multipin
Equivalent noise level, A-weighted
L, C, R: Typ. 18 dB(A) (max. 21 dB(A)); LS, RS: Typ. 20 dB(A) (max. 23 dB(A))
Polarity
+V at pin 2 for positive sound pressure
Weight
500 g (17.6 oz)
Microphone diameter
W: 240 mm (9.4 in), H: 140 mm (5.5 in), D: 195 mm (7.7 in)