Manual

Table of contents

Description
Accessories
Whats in the box
Specifications

4011 Cardioid Microphone

This amazing cardioid mic is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.

Accessories

MMP-GR/GS Preamp with Modular Active MicroLock Cable for Pencil Microphone, 1.8 m (5.9 ft)
GSM4000 Gooseneck Shock Mount for Pencil Microphone
MC4001 Microphone Clip for MMP-E Preamp with Active Cable
SB0400/SBS0400 Lightweight Stereo Boom for Pencil Microphone
SM4000-C Suspension Mount for Pencil Mics with MMP-C Preamp
UA0639 Clip for Pencil Microphone
UA0836/837 Premium Stereo Boom for Pencil Microphone
UA0897 Shock Mount for Pencil Microphone
DUA0020 Foam Windscreen for Pencil Microphone, Ø19 mm, Length 56 mm (2.2 in)
UA0896 Foam Windscreen for Pencil Microphone, Ø19, Length 92 mm (3.6 in)

Whats in the box

Cardioid Mic Capsule

Modular Active Cable, XLR, Rear, 3 m (9.8 ft)

Specifications

Polar pattern

Frequency response graph

Directional pattern Cardioid

Principle of operation Pressure gradient

Cartridge type Pre-polarized condenser

Frequency response 20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 30 cm (11.8 in) 40 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 1 kHz 10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4 Typ. 25 dB

Distortion, THD < 1% 136 dB SPL RMS, 139 dB SPL peak

Dynamic range Typ. 121 dB

Max. SPL, THD 10% 144 dB SPL peak

Rated output impedance 100 Ω

Minimum load impedance 2

Cable drive capability 100 m (328 ft)

Output balance principle Impedance balancing

Common mode rejection ratio (CMRR) > 40 dB

Power supply (for full performance) P48 (Phantom Power)

Current consumption 3.5 mA

Connector XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Weight 109 g (3.8 oz)

Microphone diameter 19 mm (0.75 in)

Capsule diameter 19 mm (0.75 in)

Microphone length 35 mm (1.38 in)

Maximum output voltage, RMS 2.2 V

Polarity +V at pin 2 for positive sound pressure

Temperature range -40°C to 45°C (-40°F to 113°F)

Relative humidity (RH) Up to 90%

Matching tolerance (frequency response and sensitivity) ±1 dB

Phase deviation for kit < 10°

Description
Accessories
Whats in the box
Specifications