Learn how to extend the life and preserve the sound of your lav mic in 5 easy steps.
Our miniature lavalier condenser microphones are built to last - and to sound their absolute best from day one and onwards. However, cleaining your omnidirectional miniature mic once in a while is a good idea. Just make certain that you do it gently and follow the below steps carefully. You'll find that this particular 'cocktail' actually involves both stirring and shaking!
Please note that this procedure only applies to our d:screet™
Omni Miniature Microphones and d:fine™
Omni Headset Microphones with round, removable grids. No cleaning fluids should be used, as you will only need demineralized water. OK, let's get started...
STEP 1 - Demineralized Water Only
Pour a bit of demineralized water into a small container. 20-30 ml should be suffucient. Again, please make sure not to add any kind of cleaning fluid.
STEP 2 - Remove the Grid from the Lavalier Microphone
Remove the grid gently by pulling it off the lav mic element.
STEP 3 - Wash and Stir the Miniature Mic
Next, simply dip the lavalier microphone into the demineralized water and stir gently. You may want to shake off the water of the mic and repeat this step a few times.
STEP 4 - Shake the Microphone Dry
Once you have carried out step 3 until the condenser mic is clean, give it a final shaking to get as dry as possible using this method.
STEP 5 - Leave Out to Dry
The last step is simply to leave the lavalier microphone out to dry overnight - without attaching the grid. After a day, it should be completely dry and you can mount the grid again and bring the mic back to your production whether this might be theater, live music, broadcast, mobile journalism, location recording or something completely different that requires capturing pristine-sounding sound.